Number Of Recorded Pixels - FujiFilm FINEPIX S602 ZOOM Owner's Manual

SHIFT button
Holding down the "SHIFT" button for 1 second or longer displays the "SHIFT CONTROL" guide.
By pressing one of the displayed button combinations, you can quickly and easily access
the corresponding setting.
The functions you can access vary depending on the current mode. The example
below shows the procedure for photography mode.
Hold down the "SHIFT" button
for1 second or longer
ＳＨＩＦＴ ＣＯＮＴＲＯＬ ＳＨＩＦＴ ＣＯＮＴＲＯＬ
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
ＩＳＯ ＩＳＯ
ＰＨＯＴＯＭＥＴＲＹ ＰＨＯＴＯＭＥＴＲＹ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＷＨＩＴＥ ＢＡＬＡＮＣＥ
ＳＥＬＦ-ＴＩＭＥＲ ＳＥＬＦ ＴＩＭＥＲ
ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ ＬＣＤ ＢＲＩＧＨＴＮＥＳＳ
２００ ２００
２５０ ２５０ Ｆ５．６ Ｆ５．６
ＭＵＬＴＩ ＭＵＬＴＩ
２５０ ２５０ Ｆ５．６ Ｆ５．６
ＡＵＴＯ ＡＵＴＯ
２５０ ２５０ Ｆ５．６ Ｆ５．６
ISO Sensitivity, photometry and white
balance
Holding down the "SHIFT" button and pressing
a button changes the setting on the command
dial. Release the button to confirm the setting.
Refer to the page listed in the table below for details
of the respective settings.

Number of recorded pixels

Self-timer
ISO Sensitivity
Photometry
White balance
＋
＋
＋
＋
DISP DISP DISP DISP
Ｎ００４９ ００４９
４００ ４００ ８００ ８００
Ｎ ００４９ ００４９
ＳＰＯＴ ＳＰＯＴ
ＡＶＥＲＡＧＥ ＡＶＥＲＡＧＥ
Ｎ ００４９ ００４９
P.69
P.50
P.51
P.54
P.52
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
ＯＫ
Number of recorded pixels
Holding down the "SHIFT" button and pressing
the "MENU/OK" button displays the menu. Use
the " " button to select a setting and
the "MENU/OK" button to confirm the setting.
Ｆ５．６ Ｆ５．６
２５０ ２５０
Self-timer
Hold down the "SHIFT" button and press the
"AE-L" button to switch between 2 sec., 10
sec. and OFF as the self-timer setting.
ＢＲＩＧＨＴＮＥＳＳ ＢＲＩＧＨＴＮＥＳＳ
ＯＫ
LCD monitor brightness/Volume adjustment
Holding down the "SHIFT" button and pressing
the "DISP" button displays the menu.Use
" " to select an option and "
the setting. Then press the "MENU/OK" button
to confirm the setting.
Note that the volume can only be adjusted in
Playback mode.
ＮＯＲＭＡＬ ＮＯＲＭＡＬ
Ｆ
Ｎ
ＢＡＣＫ
Ｎ ００４９ ００４９
OFF
(Blank)
ＢＡＣＫ
" to change
2
21