Advanced Features; Photo Mode Still Image/Movie; Quality Mode (Number Of Recorded Pixels); Quality Settings In Still Photography - FujiFilm FinePix A310 Owner's Manual

PHOTO MODE STILL IMAGE/MOVIE

3 Advanced
QUALITY MODE ( NUMBER OF RECORDED PIXELS )
Features
1
1 0 0 2
ON
3 0
2
1 0 0 2

Quality settings in Still Photography (

Quality
6 MB (2816 × 2120)
Printing at A4 size or printing part of the image cropped at A5 or A6 size.
3 MB (2048 × 1536)
Printing at A4 or A5 size or printing part of the image cropped at A6 size.
1 MB (1280 × 960)
Printing at A6 size.
0.3 MB (640 × 480)
For an image attached to E-mail or used on a website
N
Quality setting in high-sensitivity mode
If you try to select a quality setting other than "
" " is displayed blinking and the quality cannot be changed.

Quality settings in Movie (

26
1 Slide the Power switch to the side to turn the
camera on.
2 Set the Mode dial to " , " or "
3 Press the Photo mode ( ) button.
1 Press "d" or "c" to select the quality mode "
setting and then press "a" or "b" to change the
setting.
2 Press the "MENU/OK" button to confirm the
setting.
G
!
The quality setting is retained even if you set the Mode dial to
playback or switch the camera off.
) mode
,
You can choose from 4 settings. Use the table on
the below as a guide for selecting the best setting
for the shot you want to take.
G
!
The numbers to the right of each setting show the number of
available shots.
G
!
When you change the quality, the number of available shots
also changes (➡P.20).
Sample Uses
N
" when the camera is set to high-sensitivity mode,
) mode
You can select 2 levels of quality. For better image
quality, select " ", and for longer photography
time, select " ".
Movie Size Maximum shooting time
320 × 240
120 sec.
160 × 120
480 sec.

PHOTO MODE STILL IMAGE

1
1 0
".
ON
3 0
"
2
1 0
A
N
Quality setting in high-sensitivity mode
If you try to select a quality setting (➡P.26) other than "
mode, "

SENSITIVITY

1 Slide the Power switch to the side to turn the
0 2
camera on.
2 Set the Mode dial to "
3 Press the Photo mode ( ) button.
G
!
In " " Movie mode, you cannot set the ISO (sensitivity)
setting.
1 Press "d" or "c" to select the "
2 0
setting and then press "a" or "b" to change the
setting.
2 Press the "MENU/OK" button to confirm the
setting.
h Settings
: AUTO, 400, 800
, : 200, 400, 800
If you select AUTO as the ISO setting, the camera
automatically selects the appropriate ISO setting for
the subject brightness.
The AUTO ISO setting can be selected in the "
photography modes.
G
!
While selecting a higher sensitivity setting will allow you to
take pictures in darker locations, it will also increase the
amount of speckling in your images.
Streaking may also be visible in shots of scenes such as the
night sky.
Choose the sensitivity setting that best suits the conditions.
High-sensitivity photography ( 800 )
1M 1M ３３ ３３
When a high sensitivity (800) is selected, the
quality is automatically set to "
When you use a high sensitivity setting, "
appears on the LCD monitor.
G
!
When you specify a high sensitivity, the amount of noise
(interference) in the image shown on the LCD monitor before
the shot is taken increases. However, this is normal and does
not indicate a fault.
G
!
The digital zoom cannot be used in high-sensitivity
photography.
G
!
The sensitivity setting is retained even if you set the Mode
dial to playback or switch the camera off.
N
" when the camera is set to high-sensitivity
" is displayed blinking and the quality cannot be changed.
" or " ".
" sensitivity
"
".
"
27