Erasing Images (Erase Frame); Advanced Features; Photo Mode Still Photography; Quality Mode (Number Of Recorded Pixels) - FujiFilm FinePix FinePixF420 Owner's Manual

ERASING IMAGES ( ERASE FRAME )
PLAYBACK MODE
1
2
1 0 0 2
ＥＲＡＳＥ ＥＲＡＳＥ
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
ＦＲＡＭＥ ＦＲＡＭＥ
ＢＡＣＫ ＢＡＣＫ
3
ＥＲＡＳＥ ＥＲＡＳＥ
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
ＦＲＡＭＥ ＦＲＡＭＥ
ＢＡＣＫ ＢＡＣＫ
0 1 0 2
0 1 0 2
4
１００−０００９ １００−０００９
ＦＲＡＭＥ ＦＲＡＭＥ
ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？
BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＯＫ ＯＫ ＹＥＳ ＹＥＳ
0 1 0 2
28
Set the Mode switch to " ".
1 Press the "MENU/OK" button during playback to
display the menu.
2 Press "d" or "c" to select " " ERASE.
Note that mistakenly erased images cannot be
recovered. Please copy important frames (files)
that you do not want to be erased to your computer
or another media.
1 Press "a" or "b" to select "FRAME".
2 Press the "MENU/OK" button to confirm the
selection.
See P.44 for information on "ALL FRAMES".
G
!
Press "a" or "b" to select " BACK" and press "MENU/OK"
button to return to single-frame playback.
G
!
Press the "BACK" button to cancel erasing single frame.
1 Press "d" or "c" to select the frame (file) to be
erased.
2 Press the "MENU/OK" button to erase the
displayed frame (file).
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press the
"BACK" button.
G
!
Pressing the "MENU/OK" button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.

PHOTO MODE STILL PHOTOGRAPHY

3 Advanced
QUALITY MODE ( NUMBER OF RECORDED PIXELS )
Features
1
1 0 0 2
ON
3 0
2
1 0 0 2

Quality settings in Still photography mode

ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
１０ １０
１９ １９
３３ ３３ ＦＲＡＭＥＳ ＦＲＡＭＥＳ
１２２ １２２
Quality mode
6 MB (2816 × 2120)
Printing at A4 size or printing part of the image cropped at A5 or A6 size.
3 MB (2048 × 1536)
Printing at A4 or A5 size or printing part of the image cropped at A6 size.
1 MB (1280 × 960)
Printing at A6 size.
0.3 MB (640 × 480)
For an image attached to E-mail or used on a website.
1 Slide the Power switch to the side to turn the
camera on.
2 Set the Mode switch to " ".
3 Press the Photo mode ( ) button.
The quality setting is retained even if you turn the
camera off or change the Mode switch setting.
1 Press "d" or "c" to select the " " quality setting
and then press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
Choose from 4 settings. Using the table below as a
guide, select the setting that best suits the desired
result.
G
!
The numbers to the right of each setting show the number of
available frames.
G
!
When changing the quality setting, the number of available
frames also changes (➡P.23).
Sample Uses
29