Craftsman 11A-B2AQ793 Fast Start Manual

A. Remove the wing nuts and carriage bolts
1
securing the upper handle to the lower
handle.
B. Remove T-bolts from
A
the handle brackets.
A
B
Pivot the upper handle
2
upward.
3
Pull upward on the
handle until the holes
in lower handle line up
with the holes
in the handle bracket.
© 2018 11A-B2RQ CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
and FOLLOW THE important SAFE OPERATION PRACTICES BEFORE OPERATING.
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
B
Starter
Rope Handle
Note: Refer to your Operator's Manual
for instructions on attaching the grass collector.
Fast Start Guide - Engine Start
Blade Control Handle
Wing Nuts
T-Bolt
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
B
A
A
B
C
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
4
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
5
D
778-15620