P Film Simulation - FujiFilm Finepix F200EXR Owner's Manual

■ h ■
h : Custom White Balance
: Custom White Balance
Choose h to adjust white
balance for unusual lighting
conditions. The options at
right will be displayed; frame a
white object so that it fi lls the
monitor and press the shutter button all the way
down to measure white balance.
If "COMPLETED!" is displayed, press MENU/OK to set
white balance to the measured value. This value
is stored even when the battery is removed and
can be reselected by pressing MENU/OK when cus-
tom white balance options are displayed.
If "UNDER" is displayed, raise exposure compensa-
tion (pg. 25) and try again.
If "OVER" is displayed, lower exposure compensa-
tion and try again.
2 Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a col-
ored instead of a white object.

P FILM SIMULATION

P
Simulate the eff ects of diff erent types of fi lm, in-
CUSTOM WB CUSTOM WB
cluding sepia and black-and-white.
SHUTTER SHUTTER NEW WB NEW WB
NOT CHANGE NOT CHANGE CANCEL CANCEL
c PROVIA/
STANDARD
d Velvia/
e ASTIA/
b B&W
f SEPIA Take pictures in sepia.
Using the Menus: Shooting Mode
FILM SIMULATION
Option Option
Standard color reproduction. Suited
to a wide range of subjects, from por-
traits to landscapes.
A high-contrast palette of saturated
colors, suited to nature photographs.
VIVID
A soft-toned palette of less saturated
SOFT colors.
Take pictures in black and white.
Description Description
65