Creating A Dpof Print Order - FujiFilm Finepix F200EXR Owner's Manual

Creating a DPOF Print Order

Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the
playback F-MODE menu can be used to create
a digital "print order" for PictBridge-compatible
printers (pg. 51) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is stan-
dard that allows pictures to be printed from
"print orders" stored in internal memory or
on a memory card. The information in the order in-
cludes the pictures to be printed and the number of
copies of each picture.
■ ■ WITH DATE
WITH DATE s/ WITHOUT DATE
To modify the DPOF print order, select K
ORDER (DPOF) in the playback F-MODE menu
and press the selector up or down to highlight
WITH DATE s or WITHOUT DATE.
MODE MENU
SLIDE SHOW
WITH DATE
PRINT ORDER (DPOF)
WITHOUT DATE
RESET ALL
52
/ WITHOUT DATE
K PRINT
WITH DATE s: Print date of record-
ing on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the selector left or right to dis-
play a picture you wish to include in
or remove from the print order.
2
Press the selector up or down to
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until the num-
ber of copies is 0.
PRINT ORDER ( DPOF )
DPOF: 00001
01 SHEETS
FRAME SET
2 Tip: Intelligent Face Detection
If the current picture was created with Intelligent
Face Detection, pressing g sets the number of
copies to the number of faces detected.
Printing Pictures via USB
Total number of prints
Number of copies