7.24
I would like to use a USB disk
1. Insert the USB disk and a [Copy To USB Disk] dialog box will appear,
and you are asked whether to copy files from DVP510B to the USB disk.
7.25
I would like to resume the factory default setting
(Factory Reset)
7.25.1 Using OSD menu
1.
Press [MENU] on the remote control or control panel to activate
the setting menu.
2.
Press [], [], [], or [] to select [Setting].
3.
Press [ENTER] to activate.
4.
Press [] or [] to select [Advanced] menu.
5.
Press [] to select [Factory Reset].
6.
Press [] or [] to select [Yes].
7.
Press [ENTER] to execute.
7.25.2 Use Compound Key
1.
Use the control panel, and press [ENTER] + [MENU]
simultaneously to restore the initial value.
<Note> Before using the compound keys, please remove all VGA-IN
devices.
7.26
Computer-related functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to
Connections
Press [] or [] on the remote control or control panel
to select.
in this user manual
Copy To USB Disk
Yes
No
Chapter 4 Installation and
English-
34