Table of Contents
Advertisement
INSTALLATION OF OPTIONAL MODULES
Voice Module Installation
The Voice Module provides audio for all aspects of modes, alerts
and GPS features.
To install:
• Make sure "Voice On" is enabled in Option Mode (default
setting). (See Option Mode in owner's manual.)
• For maximum volume, find a convenient location close to
the driver's ear, such as the trim panel between A & B pillars.
Attach speaker using the supplied clip.
• Run the cable from the location selected to the iBox, so that it
doesn't interfere with normal driving operation.
• Plug the cable into the VOICE Port on the iBox. The volume is
controlled by the knob on Voice Module.
NOTE: This is the only audio option that can be plugged into
the Pro-3700. Any other device may damage the unit and void
the warranty.
Optional Rear Laser/Radar Module
For drivers interested in gaining increased detection from
behind, the Pro-3700 can be upgraded with a second
laser/radar antenna. This antenna is mounted in the back of
the vehicle facing rearward and can be purchased from many
Whistler retailers or directly from Whistler; ask for the Part
Number SWRA-37.
The Pro-3700 iBox is designed to operate with an additional
laser/radar receiver; the RADAR2 port is the input for the
optional laser/radar receiver. An asterisk is displayed next to
the Band ID when laser/radar signals are detected from this
module. Must turn RADAR2 on in Option Mode.
18
Advertisement
Table of Contents
