Table of Contents
Advertisement
Pro-3450_OwnersManual.qxd
OPERATION
10th time
Ka ON
11th time
Laser ON
12th time
Voice OFF
13th time
DSP NOR
*Factory settings.
Press and hold P/V twice anytime to exit. NOTE:
POP
™
Mode off, turns on VG-2.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• P ress C i t y and Q u i e t simultaneously and release. Display re a d s :
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
• Press P/V to exit.
Voice Module Port
Allows you to use an optional Whistler Voice Module, Ord e r
Code 202971 (See accessory page for ordering, option mode
for programming). Any other device may damage the unit
and void your warranty. When mute or auto quiet modes
a re engaged, the audio will be cancelled to the voice port.
Rear Laser Port
Allows you to use an additional optional laser receiver for
enhanced coverage for the rear of the vehicle. NOTE:
and rear laser modual for front windsheild included.
3/15/04
4:30 PM
Page 17
D = ON
Turns Ka Band ON
C = OFF
Turns Ka Band OFF
D = ON
Turns Laser ON
C = OFF
Turns Laser OFF
D = ON
Real Voice
ON
®
C = OFF
Real Voice
OFF
®
D or C
Normal
Vertical
Reversed
Turning
Front
14
RADAR ALERT
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
1 = weak signal, 9 = strong signal
Pulse Protection
®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display reads:
After 3 seconds standard alert pattern continues.
15
Advertisement
Table of Contents
