Table of Contents
Advertisement
POWER CONNECTION
Power Cable Connection
The iBox has the power cable attached to it. The ground wire
has a "U" type connector which should be fastened to a
metal surface that is grounded to the vehicle. Look for an
existing screw or bolt under the dash to use as a grounding
point. The power wire has a spade type connector that can be
connected to a switched or non-switched +12 volt DC circuit
in your vehicle's fuse box. A switched circuit is one that has
power when your vehicle is on, but has no power when your
vehicle is off.
NOTE: To utilize the faux security LED option, the iBox should
be powered from a non-switched 12 volt source.
20
Advertisement
Table of Contents
