Table of Contents
Advertisement
INSTALLATION OF LASER/RADAR ANTENNA
Large L and small L brackets maybe used in combination in a
variety of differnet ways.
The Small L Brackets are fastened to the Large L Bracket using the
#10-32 x 1/2" bolts, #10-32 nuts and lock washers.
To fasten the Large L or Small L Brackets to your vehicle, mark the
supporting structure through the appropriate holes in the brackets,
and then drill the holes in the supporting structure with a 13/64"
drill bit. Attach the bracket(s) to the supporting structure using two
bolts (#10-32 x 1-1/4") and corresponding nuts, flat washers, and
lock washers. Because rough road surfaces can cause excessive
vibration or bouncing, be certain to fasten the bracket(s) securely to
your vehicle.
Horizontal or Vertical Mounting Of Antenna
The antenna can be attached to the vehicle in a horizontal or
vertical position, or at any angle in between. Select the position
that allows you to fasten the antenna to your vehicle in the most
secure manner.
Horizontal Mounting - antenna window facing down the road
When mounting the antenna in a horizontal position (or on an
angle), remember to keep the ANTENNA window as close to
perpendicular as possible to the road surface
10
Advertisement
Table of Contents
