Odyssey РС310 Owner's Manual
Hide thumbs
Also See for РС310:
- Owner's manual (32 pages) ,
- User manual (8 pages) ,
- Technical manual (22 pages)
Subscribe to Our Youtube Channel
Related Manuals for Odyssey РС310
Summary of Contents for Odyssey РС310
- Page 1 OWNERS MANUAL E N G I N E E R E D W I T H T H I N P L A T E P U R E L E A D ( T P P L ) T E C H N O L O G Y EXTREME POWER AND ENDURANCE www.odysseybattery.com...
- Page 2 80% depth of discharge (DOD). A typical starting, lighting and ignition (SLI) battery can do one or the other, but not both. It is either a sprinter or a long distance runner; ODYSSEY batteries will do both –...
- Page 3 2. Inspect existing battery cables for corrosion, acid damage or insulation deterioration. Replace if deterioration is present. 3. Position your ODYSSEY battery in the battery holder and fasten firmly to the vehicle. • Optional height adapter may be used on 34-PC1500 models for installations where a group 24 or group 27 is required.
- Page 4 If your V-Twin motorcycle is equipped with a standard 32 amp single phase stator/alternator and you ride at a low engine rpm around town or even on long rides, the appropriate ODYSSEY battery may run out of charge due to ®...
- Page 5 * Cold Start Performance S.A.E J537 JUNE 82 **Pulse Current † Can be fitted with brass automotive terminal Optional metal jackets available on PC545, PC680, PC925, PC1200, PC1700 and 31-PC2150 Operating Temperature Range: PC310 and PC1800-FT: -40°F (-40°C) to 122°F (50°C), PC370, PC950 and PC1100: -40°F (-40°C) to 122°F (50°C), (PC535 and PC625: -40°F (-40°C) to 113°F (45°C), PC545, PC680, PC925, PC1200 and PC1700 without metal jacket: -40°F (-40°C) to 113°F (45°C), PC545, PC680, PC925, PC1200 and PC1700 with metal jacket: -40°F (-40°C) to 176°F (80°C), PC1220, PC1350 and PC2250: -40°F (-40°C) to 104°F (40°C), All other...
- Page 6 11.88 Volts To get long life from the ODYSSEY battery, it is important that the battery is kept near full charge, approximately 12.8 volts. If there are electrical loads during storage, then the negative battery cable should be disconnected or an independent float charger used.
- Page 7 36V BATTERY CONNECTION To power a 36V trolling motor, you will need to connect three ODYSSEY batteries in series. As shown in the bottom illustration, the negative of Battery 1 is wired to the positive of Battery 2; the negative of Battery 2 is then connected to the positive of Battery 3.
- Page 8 Batteries for warranty replacement consideration are to be returned to the original supplying distributor/dealer. If not feasible, other ODYSSEY ® distributors/dealers can be approached but a warranty processing fee may be applied. This warranty may vary from country to country; contact your authorized ODYSSEY ®...
Need help?
Do you have a question about the РС310 and is the answer not in the manual?
Questions and answers