Tripp Lite B051-000-AC Quick Start Manual page 5

Hardware Setup
Rack Mounting
The B051-000-AC comes with both 0U and DIN rail mounting hardware so that it can be conveniently mounted on a system rack.
To mount the unit using the 0U hardware, follow these steps:
1. Remove the two screws from the top or bottom of the unit
(towards the back panel).
2. Secure the bracket to the unit using the two screws you just
removed.
3. Mount the unit in a rack using user-supplied screws that are
appropriate for your rack. Note: The unit can also be wall
mounted using the 0U mounting hardware.
12-176 93-3159_RevC.indd 5
continued
5
To mount the unit using the DIN rail hardware, follow these steps:
1. Secure the 0U mounting bracket to the unit by following steps
1 and 2 in the previous section.
2. Secure the DIN rail hardware to the 0U hardware using the
included screws.
3. Hang the unit on the DIN rail.
8/27/2012 2:48:15 PM