Setting the signal
en
M
Setting the signal
S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to Ú Stop.
2. Set the volume for the button signals (depending on model)
Press the 0 button until the required
volume is reached.
3. Selecting the volume for the information signals
Turn one position clockwise
40
Turn one position
Press and hold the ° C button +
clockwise.
turn one position clockwise.
Go to step 3. or
Press the 0 button until the
required volume is reached.
Release the button.
Set to Ú Stop, which exits setting mode for
the signal volume.
Set to Ú Stop, which exits setting
mode for the signal volume.