GEDA 1500z Original Operating Manual page 65

®
GEDA 1500 Z/ZP

The platform can be only be
operated above the initial 2 m
safety height with the "UP" (3)
or "DOWN" (4) buttons using the
electric module.
8 = STOP button (does not engage)
 Selector switch (2) to "II" position (Automatic travel)
Ascent
 Press and hold the UP button (3).
The platform only moves in the lower safety
area (2.0 m above the ground) while you press
the UP button (3).
 After exceeding this safety area, release the
UP button (3).
The platform automatically travels onward to
the next landing and stops there.
 For continuous through-travel to the "second
landing", keep the UP button (3) pressed
until the limit-switch approach bar for the
first landing is overrun.
Descent
 Press and release the DOWN button (4).
The platform travels downwards and stops before the lower safety area.
 Press the DOWN button (4) again and keep it pressed.
 The system issues an alarm signal and after about 3 seconds, the
platform starts up and stops at the DOWN limit switch.
BL076 GB Edition 07.2015
WARNING
Platform operators are only allowed to continue travel
after ensuring that the path of travel downwards is clear.
65 / 84
Operation
8
3
4
2
3
4
Operating Manual