GEDA 1500z Original Operating Manual page 64

Operation
 Selector switch (2) to "I" position (dead man's control)
1 = EMERGENCY STOP button
Ascent
 Press and hold the UP button (3).
The load platform only moves while you keep
pressing the UP button (3).
The platform overruns the landing level limit
switch approach bar and is stopped by the
UP limit switch.
Descent
 Press and hold the DOWN button (4).
The platform only moves as long as the button DOWN (4) is pressed.
The platform stops before the bottom safety area (about 2 m above the
ground).
 Press the DOWN button (4) again and keep it pressed.
 The system issues an alarm signal and after about 3 seconds,
the platform starts up and stops at the DOWN limit switch.
Operating Manual
WARNING
Platform operators are only allowed to continue travel
after ensuring that the path of travel downwards is clear.
64 / 84
®
GEDA 1500 Z/ZP
1
2
3
4
BL076 GB Edition 07.2015