Adding Laundry; Cancelling The Programme; Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry - Siemens WM14N23EDN User Manual And Installation Instructions

Adding laundry

Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Press ⁠ .
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
Add or remove laundry.
2.
Close the door.
3.
Press ⁠ .
4.

Cancelling the programme

Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Press ⁠ .
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high: Start
the Spin or Drain programme.
Remove the laundry.
3.
Resuming the programme
when the programme status
is Rinse Hold
Set the Spin or Drain programme.
1.
Press ⁠ .
2.

Unloading the laundry

Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Open the door.
1.
Remove the laundry.
2.

Switching off the appliance

Turn the programme selector to
1.
.
Off
Turn off the tap.
2.
Basic operation en
37