aci DSIM-SS Installation Manual page 13

8. Check the LED on the DSIM Module to make sure the cable length setting is correct.
Cable Length dB Value
9 dB
18 dB
27 dB
9. Set the level and slope of the amplifier to the design specifications with the input pad
and Equalizer.
NOTE: The station will heat up when the amplifier housing is closed, causing the slope
and levels to increase by approximately 0.5 to 0.75 dB.
10. Remove the controller from the amplifier, and the DSIM is all set!
Set 1 Set 2
9-Dits -
1-Dit 8-Dits
2-Dits 7-Dits
Page 13 of 18
DSIM-SS
Installation Guide Rev A
Set 3
3 Long Dashes
Blue-Operation
Orange-Programming