MicroNX ELEC ENGINE SE-170C Instructions For Use Manual page 6

Chapter 2. Safety
2.3 Caution
1) When any abnormality such as vibration, heat and strange sound is detected before or during use,
stop using the product immediately and examine it.
2) Prepare extra consumables in using the product.
3) Ensure that speed which is recommended by the manufacturer is maintained on tools used for
implant surgery. It is at risk for accident when it exceeds the permitted speed.
2.4 Notice
1) This product is manufactured to be used for implant surgery.
Ensure that the product is use in accordance with the intended use and correct procedure.
2) With priority to patient's safety, use the product with good care.
3) Read the instruction and thoroughly understand functions of each component before use.
4) Implant engine controller and foot switch are not subject to Autoclave.
When main body is contaminated by pollutant, turn the power off,
clean the product with clean and wet cloth and remove moisture with dry cloth.
5) Check whether input voltage corresponds with actual voltage after connecting the power supply.
6) Dispose irrigation tube as medical wastes after use.
5/24