Schedule Key - York YCAV0267E Installation Operation & Maintenance

DATE / TIME & SCHEDULE KEYS (CON'T)
The month can be selected by keying in the numerical
value to select the day. After the month is selected, the
√ (ENTER) key must be pressed to store the data.
A "0" must be keyed in for months 01-
09. The panel will automatically pro-
vide the abbreviation of the month.
Pressing the ▼ (DOWN ARROW) key again scrolls
to the year:
CLOCK FRI 18-JUN-2005 10:15:33 AM
YEAR
The year can be selected by keying in the numerical
value to select the year. After the year is selected, the
√ (ENTER) key must be pressed to store the data.
Pressing the ▼ (DOWN ARROW) key again scrolls
to the hour:
CLOCK FRI 18-JUN-2005 10:15:33 AM
HOUR
The hour can be selected by keying in the numerical
value for the hour. After the hour is selected, the √
(ENTER) key must be pressed to store the data.
One or two "0's" must be keyed in for
hours 00-09.
Pressing the ▼ (DOWN ARROW) key again scrolls
to the minute:
CLOCK FRI 18-JUN-2004 10:15:33 AM
MINUTE
The minute can be selected by keying in the numerical
value for the hour. After the minute is selected, the √
(ENTER) key must be pressed to store the data.
One or two "0's" must be keyed in for
minutes 00-09.
JOHNSON CONTROLS
Pressing the ▼ (DOWN ARROW) key again scrolls
to AM/PM:
AM/PM can be selected by pressing the ◄ or ► (AR-
ROW) keys. After the meridian is selected, the √ (EN-
TER) key must be pressed to store the data.
Pressing the ▼ (DOWN ARROW) key again scrolls to
the time format selection:
= XXXX
The time format may be displayed in either a 12 hour or
24 hour format. Selection can be changed by pressing
the ◄ or ► (ARROW) keys. The √ (ENTER) key must
be pressed to store the data.
SCHEDULE Key Operation
The Daily Schedule must be programmed for the unit
start and stop times. To set the schedule, press the
= XX
SCHEDULE key. The display will provide a message
allowing access to 2 types of schedule information:
The schedule types are:
The schedule type (UNIT OPERATING SCHEDULE or
= XX
SOUND LIMIT SCHEDULE) may be changed by press-
ing the ◄ (LEFT ARROW) or ► (RIGHT ARROW)
keys followed by the √ (ENTER) key. The selection
must be entered by pressing the √ (ENTER) key before
a schedule display will appear.
CLOCK FRI 18-JUN-2004 10:15:33 AM
AM/PM ◄ ►
CLOCK FRI 18-JUN-2004 10:15:33 AM
TIME FORMAT ◄ ►
SCHEDULE CHOOSE SCHEDULE TYPE
◄ ► XXXXXXXXXXXXXXXXXXXXXXXXX
· UNIT OPERATING SCHEDULE
(Default selection)
· SOUND LIMIT SCHEDULE
(Only if Sound Limiting is enabled by the factory
when the option is installed.)
FORM 201.21-NM3 (616)
= XX
= XXXXXXX
8
291