Tsubaki BB Series Manual

Tsubaki BB Series Manual

Cam clutch

Advertisement

BB15~BB40、BB15-1K-K~BB40-1K-K、BB15-2K-K~BB40-2K-K、
Thank you for buying Cam Clutch products.
Before installing or working on the product, check label for correct size and make sure you have the complete set of
parts. If any part is missing, contact your distributor immediately.
This manual should be considered an essential part of the unit and remain with the unit when redistributed.
 Your Cam Clutch is a high quality, sophisticated unit which should be handled by experienced engineers only.
 For safety purposes, make sure this manual is easily accessible by the user at all times.
Safety precautions in this manual are classified into two categories: "WARNING" and "CAUTION". These are defined as follows:
WARNING
CAUTION
Notice that although categorized under "CAUTION", subjects discussed may lead to serious results depending on the situation.
Make sure turning forces are not applied to Cam Clutch or turning shaft of the equipment when conducting inspection or maintenance.
Pay special attention to the back stopping application to prevent accidents.
Frequent starting and stopping will apply excessive force on the mounting. Verify mounting strength.
Inaccurate installation and mounting, various load conditions, wear and tear of parts, and life expectancy can all affect the performance of a
Cam Clutch. Inspect and maintain periodically and install a safety devise on your equipment.
Comply with Ordinance on Labor Safety and Hygiene 2-1-1 general standards.
To ensure safety and optimal performance, carefully read this instruction manual in its entirety.
Confirm rotational direction prior to installing.

Structure

BB type
BB-2GD type
Cam Clutch Manual
BB、BB-1K-K、BB-2K-K、BB-2GD、BB-2GD1K-K
BB15-2GD~BB40-2GD、BB15-2GD1K-K~BB40-2GD1K-K
Death or serious injury may result from misusing the product without following the instructions.
Minor or moderate injury, as well as damage to the product may result from misusing the product
without following the instructions.
BB-1K-K type
①Inner Race
②Outer Race
③Cam Cage
④Steel Ball
⑤Shield
⑥Retainer
BB-2GD1K-K type
①Inner Race
②Outer Race
③Cam Cage
④Steel Ball
⑤Seal
⑥Retainer
⑦Side Plate
BB Series
SAFETY
WARNING
CAUTION
①Inner Race
②Outer Race
③Cam Cage
④Steel Ball
⑤Shield
⑥Retainer
⑦Key
BB-2K-K type
①Inner Race
②Outer Race
③Cam Cage
④Steel Ball
⑤Seal
⑥Retainer
⑦Side Plate
⑧Key
①Inner Race
②Outer Race
③Cam Cage
④Steel Ball
⑤Shield
⑥Retainer
⑦Key
⑧Key

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BB Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tsubaki BB Series

  • Page 1 Cam Clutch Manual BB Series BB、BB-1K-K、BB-2K-K、BB-2GD、BB-2GD1K-K BB15~BB40、BB15-1K-K~BB40-1K-K、BB15-2K-K~BB40-2K-K、 BB15-2GD~BB40-2GD、BB15-2GD1K-K~BB40-2GD1K-K Thank you for buying Cam Clutch products. Before installing or working on the product, check label for correct size and make sure you have the complete set of parts. If any part is missing, contact your distributor immediately. This manual should be considered an essential part of the unit and remain with the unit when redistributed.
  • Page 2 Recommended shaft diameter and housing bore diameter. ■ Machine the shaft and housing to the measurements and tolerances given in the table below. Torque is transmitted by press fit, for models without keyways. Clutch may slip if the shaft and housing are not machined to the recommended dimensions. Recommended Recommended housing bore dia.
  • Page 3 1-1, Kohtari-Kuresumi, Nagaokakyo TSUBAKIMOTO CHAIN CO. Kyoto 617- 0833, Japan Website: http://tsubakimoto.com/ Global Associated Partners: U.S. Tsubaki Power Transmission, LLC Tsubakimoto Singapore Pte. Ltd. Tsubakimoto Europe B.V. http://www.ustsubaki.com/ http://tsubaki.sg/ http://tsubaki.eu/ Tsubaki of Canada Limited Taiwan Tsubakimoto Co. Tsubakimoto U.K. Ltd.

This manual is also suitable for:

Bb15Bb15-2gdBb17Bb17-2gdBb20Bb20-2gd ... Show all

Table of Contents