Summary of Contents for John Lewis Milan Bed 803/45901
Page 1
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
Page 2
Fittings and parts checklist Fittings M4 Allen Key x 1 M6 x 40mm Bolt x 8 M5 Allen Key x 1 Side Plastic Caps x 30 Parts Headboard x 1 Footboard x 1 Side Rails x 2 Slats x 15 Legs x 4...
Page 3
Step by step assembly instructions Step One Place Wooden Legs (5) over the holes in the underside of the Headboard (1) and Footboard (2) as per drawing. Insert 2 M6 x 40mm bolts (A) to fix each leg in place and tighten using Allen Key M4 (C) provided. M6 x 40 bolt M6 x 40 bolt M6 x 40 bolt...
Page 4
Step Three Fix the Slats (4) to the bed by first inserting the Side Plastic Caps (B) on each end of the slats and then pushing the caps into the holes in the Side Rails (3). Slat Side Plastic Cap Side Plastic Cap x 30 Side Rail Bent Slat x 15...
This bed is for use with a standard single size mattress L190 x W90 x H18. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.