Download Print this page

Care And Maintenance; Safety Instructions - John Lewis Milan Bed 803/45901 Assembly Instructions

Advertisement

Care and Maintenance

This Milan bed should be cleaned using a soft, damp cloth and dried immediately.
Do not use a very wet cloth or allow any liquid contact for a long period of time as this can
permanently damage the surface.
Do not use detergents and do not rub as this can cause permanent damage.
Always protect your bed from direct sunlight as this may accelerate the natural ongoing
discolouration process.
Screws holding together the bed frame should be tightened regularly.
Please retain this information leaflet for future reference.
This product complies with BS EN 1725:1998.

Safety Instructions

Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause
damage or injury. Furniture can be dangerous if incorrectly installed. Any assembly should be
carried out by a competent adult.No liability will be accepted for damage or injury caused by
incorrectly installed or assembled furniture. During assembly, children should be kept away from the
product due to possible risk of injury. Do not use this item if any components are missing or
damaged.
It is recommended that care is taken when moving heavy objects to a new location to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
Warning: Not suitable for children under 4 years old.
Warning: Do not place this child's bed near heat sources, windows or other furniture.
Warning: Do not use this child's bed if any part is broken, torn or missing.
Children are likely to play, bounce, jump and climb on furniture, therefore the furniture should not be
placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords and
should be placed either tight to any wall or have a gap of 300mm between the wall and the side of
the bed.
This product complies with BS EN 8509:2008+A1:2011 and BS EN 1725:1998.
This bed is for use with a standard single size mattress L190 x W90 x H18.
If you require any additional information or have any issues with this product please call
the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.
www.johnlewis.com
5/5

Advertisement

loading

This manual is also suitable for:

Milan bed 803/46202