Wall Mounting With Junction Box - HIKVISION DS-2CD1001-I Quick Start Manual

Network Bullet Camera·Quick Start Guide
6) Tighten the No.3 adjusting screw.
7. (Optional) Install the waterproof jacket. Refer to 2.3 Installation of
Waterproof Jacket for details.

Wall Mounting with Junction Box

Before you start:
Both wall mounting and ceiling mounting are suitable for the

bullet camera. Wall mounting will be taken as an example in this
section. And you can take steps of wall mounting as a reference
for ceiling mounting.
You need to purchase a junction box first.

Steps:
1. Paste the drill template (supplied) to the desired mounting
position on the wall.
2. Drill the screw holes and the cable hole (optional) in the wall
according to the drill template.
Figure 2-3 3-aix Adjustment
16