Installation; Ceiling Mounting - HIKVISION DS-2CD1001-I Quick Start Manual

Network Bullet Camera·Quick Start Guide

2 Installation

Before you start:
● Make sure the device in the package is in good condition and all
the assembly parts are included.
● The standard power supply is 12V DC, please make sure your
power supply matches with your camera.
● Make sure all the related equipment is power-off during the
installation.
● Check the specification of the products for the installation
environment.
● Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
Note:
Three types of the camera share the same installation method, we
take type III bullet camera as the example to illustrate the
installation.

Ceiling Mounting

Before you start:
Both wall mounting and ceiling mounting are suitable for the bullet
camera. Ceiling mounting will be taken as an example in this section.
13