Table of Contents
Advertisement
Troubleshooting
Problem
Poor sound
No sound from the
audio component
Wrong screen size
No picture, no sound
No sound
Green and distorted
screen
"Feature Not Available"
appears
"ACI Error" appears
"No Recording"
"No Recording
Possible"
"No Recording Media
Problem"
"No Recording Device
Busy"
59
Adjust the "MaxxAudio" setting.
If receiving a poor signal in "Stereo/ t·u", switch to "v"
(monaural).
Change the broadcasting system using "Manual".
Audio signals received from EXT-5 and EXT-6 cannot be sent
to the AUDIO OUT terminal.
Switch "Size" in "HDMI Setting" to "1" or "2". (480p (525p) only)
Read the user manual of the connected device and perform the
following:
Check if the output setting of the device is correct.
g
Change the signal format of the device to other format.
g
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI
devices, or "Analogue" or "Auto" for DVI devices.
(Not available for EXT-6)
Wait a little for the signal to stabilize when switching the signal
format for an HDMI device.
Is the "T-V LINK" compatible device connected to EXT-2?
Is the SCART CABLE "Fully Wired"?
Is the "T-V LINK" compatible device turned on?
After confirming all the conditions above, press "OK" button
again.
Press
to start "ACI" again.
If you still receive the "ACI Error" after numerous tries, press
to cancel "ACI".
A problem occurs at the recorder.
The displayed video cannot be recorded.
The recorder is not ready for recording.
Check the videotape or DVD disc.
The recorder is recording another programme, or is playing.
Actions
Page
42
42
18
–
46
–
–
–
46
–
–
–
–
–
–
–
Advertisement
Table of Contents
