JVC LT-42ED82G Instructions Manual page 59

To start "Service Scan".
Mode Add
Start Scan
A select "Start Scan"
B start scanning
If you set "Scan" to "Network", the "Network" menu appears. Select broadcasting stations from a list.
Network Name
ARD
ZDF
RTL
Signal Check
Signal Check 14:00 05/05/2007
Service
Channel 33
Doku/KiKa
Info/3sat
ZDF
Signal : Excellent
Signal Quality
Signal Strength
Navigate MENU Exit
The "Channel" is the frequency of the digital broadcasting. It differs from the channel number
displayed on the TV.
Factory Settings
All registered digital channels are deleted and the DTV menu settings are initialised. Digital
channels are reregistered.
Are you sure you want to delete the PR list and
reset all settings?
Yes
A select "Yes"
B start
If "Attenuator" (P. 46) is set to "On", "RF Attenuator" menu will appear during initial setting. Select "On" or
"Off" and press "OK" button.
Scan completed! Store services?
Yes
A select
B registered / cancel
C set
You can check the broadcast signal level of the channel you
are watching.
Signal level: Poor < Acceptable < Excellent
To check another broadcast
channel
No
Initial setting (P. 11) will start again.
No
A select "Yes"
B set
select
56