Table of Contents
Advertisement
1. If the timing is over spec (Fh, Fv or dot clock), the image shall be blanking, and
OSD background shall be non-transparent.
2. If the timing is inspect but not defined, the image shall be non-blanking.
5.1.9 No signal
While no signal is detected, the following OSD message shall shows on 3
seconds then go in to power saving.
OSD Background = Non-transparent
Image = Blanking
VX2739wm-1
CONFIDENTIAL – DO NOT COPY
ViewSonic Corporation
53
VX2739wm-CN
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VX2739wm-1 and is the answer not in the manual?
Questions and answers