ViewSonic VX2739wm-1 Service Manual page 17

[1] + [2]
[1] + [▼] + [▲]
(Keep pushing 5 sec)
[1] + [▲]
[1] + [▼]
[2] + [▼]
ViewSonic Corporation
and mute to default without OSD message
Toggle 720x400 and 640x400 mode when input
720x400 or 640x400 mode
* Default = 720 x 400
White Balance
1. It will not shown on user's guide
2. OSD message as below,
(Image = no blanking)
3. Recommend environment
3.1. Optical (Best) input timing = 640 x 480 @
60Hz;
Following timing modes also
recommended,
800 x 600 @ 60 Hz
1024 X 768 @ 60 Hz
3.2. Pattern as below,
OSD Lock / Unlock (refer to segment 4-6-4)
Power Lock / Unlock (refer to segment 4-6-5)
Toggle DDC/CI and DDC/2B (DDC/CI enable/disable)
and show following message for 3 seconds,
When switch to DDC/CI
When switch to DDC/2B
CONFIDENTIAL – DO NOT COPY
17
VX2739wm-1
VX2739wm-CN