ViewSonic VX2739wm-1 Service Manual page 47

Memory Recall
ViewSonic Corporation
Sleep
1. Adjust time range before
going to sleep mode. Time
range = 30, 45, 60, 120
(Minutes) and Off.
2. Default = Off
3. When Sleep mode is
triggered, the power of
monitor will be turned off.
4. Only active in HDMI Mode
(both in AV&PC)
5. Key button definition:
[1]: Back to previous OSD
status
[2]: Change to the selected
sleep time setting
[Up]: Rolling up the slider
(When push the button
on the top position, the
slider shall go down to
the bottom item
[Dn]: Rolling down the slider
(When push the button
on the bottom position,
the slider shall go down
to the top item
CONFIDENTIAL – DO NOT COPY
47
30 Minutes
Set time before going
to Sleep mode = 30
Minutes
45 Minutes
Set time before going
to Sleep mode = 45
Minutes
60 Minutes
Set time before going
to Sleep mode = 60
Minutes
120 Minutes
Set time before going
to Sleep mode = 120
Minutes
Off
Disable Sleep mode.
VX2739wm-1
VX2739wm-CN