ViewSonic VX2739wm-1 Service Manual page 52

2. Key button definition:
[1]: Turn off the OSD message.
[2]: Turn off the OSD message and disable Resolution Notice function
3. The OSD should disappear after 10 sec or by pushing button [1] or [2]
4. After the OSD turns off, it will not show on again before next timing change,
input change or power off.
5. Resolution Notice function should be disabled when push button [2] under
Resolution Notice OSD
6. The "1920x1080" will be replaced by actual panel resolution.
5.1.6 0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to
buffer for further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
5.1.7 OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times
out. There shall not be a separate save
5.1.8 Out of range
While non-defined timing is detected, following OSD message will keeps showing
on,
ViewSonic Corporation
CONFIDENTIAL – DO NOT COPY
52
VX2739wm-1
VX2739wm-CN