NOMA 043-7020-8 Instruction Manual page 9

Additional functions and maintenance
Forced shutdown
If there is no operation during the running of the fan, after 12 hours
of continuous operation, the fan will be forced to shut down
automatically.
Intelligent memory
When the fan is turned o or powered o , it will run in the state
before turning o or power o when the power is powered on
again (the timing function is not memorized).
Screen-o function
In case of no operation for 60 seconds during normal operation,
the indicator light on the body will be automatically o , but the fan
will continue to operate. Press the ON/OFF button to turn o the
screen when the screen is o , and press the other button to
restore display.
Automatic reset function of spiral wind oscillating after shutdown
After shutdown, the spiral wind oscillating function is automatically
reset.
1. Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug
towards blades.
3. Remove fuse carefully. Push the fuse from the other side or turn fuse holder
over to remove fuse.
4. Risk of fire. Replace fuse only with 2.5 A, 125 V fuse.
5. Close fuse cover. Slide closed the fuse access
cover on top of attachment plug.
6. Risk of fire. Do not replace attachment plug.
It contains a safety device (fuse) that should
not be removed. Discard product if the
attachment plug is damaged.
Note:
1. Do not force the fuse when replacing to reduce the risk of damage.
9