Table of Contents
Advertisement
118
It will damage the IP camera.
c. The instrument's PoE maximum power output is 24W. If Ultra- high-power load happens, the tester
will enter protection mode.
3.7 DC12V 2A power output
When the IP tester is turned on, the 12VDC power output ON by default. The smaller end of the
supplied converter cable connects to the tester's DC12V/2A OUTPUT and the other end connects to the
camera's power input.
Application
Power output function is mainly used in the camera field demonstration and testing, meanwhile, for
some camera installation sites, If there is no power outlet for the adapter to power the camera, the tester
can offer temporary power for it. But we do not suggest tester supply power for a long time.
Advertisement
Table of Contents
Need help?
Do you have a question about the IT-600-IPC Series and is the answer not in the manual?