Electrolux WASL6IE300 User Manual page 39

necessary detergent dosage for your
cycles.
It is possible to set two types of
detergent: e.g., the value entered in
Detergent Type 1 could refer to powder
detergent and the value entered in
Detergent Type 2 could refer to liquid
detergent.
1. Tap on the Detergent Dosing.
2. Tap on the Detergent Type 1 or
Detergent Type 2 bar.
3. Scroll the bar right or left to set the
average detergent dosage in ml as
suggested on the detergent
packaging.
4. Tap on the Detergent Dosing bar to
return to the machine setting list or
tap on the Programmes bar to return
to the programme summary screen.
14.10 Water Softener
Read the "The Water
Softener (SoftWater
Technology)" chapter
carefully.
With this setting you can decide when
the water softener function should
operate:
1. Tap on the Water Softener bar.
2. Scroll the submenu bar right or left to
set:
• OFF: the water softener function
is deactivated.
• Wash: the water softener function
is active during washing phase
only (factory setting).
• Wash & Rinse: the water
softener function is active during
washing and rinsing phase.
This setting increases
the salt consumption.
3. Tap on the Water Softener bar to
return to the machine setting list or
tap on the Programmes bar to return
to the programme summary screen.
14.11 Service
This area is reserved for the Authorized
Service.
0 1
5 6
14.12 Shortcuts
This setting allows to bring the shortcuts
shown in the next drawing visible on the
summary screen.
To activate the shortcuts:
1. Tap on the Shortcuts bar to open
the list of the available shortcuts.
ENGLISH
2 3 4
7 8 9
< OK
39