CONTENTS FOREWORD........................2 SAFETY PRECAUTIONS AND PROCEDURES..............2 THE FOLLOWING SYMBOLS ARE USED:..............2 APPLICATIONS........................3 FEATURES..........................3 NAME AND FUNCTION OF EACH PART..............4 ELECTRIC SPECIFICATION ....................8 Safety and maintenance standards..................8 Battery Replacement ......................9 10. SERVICE ..........................9 11. END OF LIFE ........................10...
1. FOREWORD Solar meter: a device used to measure solar power. From the moment you buy such a product, your future is not uncertain any more. When the sun shines recklessly, just take the TM-206 and aim its opening at the sun, and you will see how powerful the sun is.
3. APPLICATIONS Transmission measurement is most suitable for measuring the effectiveness of the solar film. Solar radiation measurement. Car windows light intensity measurement. Optimal incident angle for the solar panel. Measurement of the sun’s transmission through transparent and film glass Convenient, no need to adjust, data displayed clearly.
5. NAME AND FUNCTION OF EACH PART 5.1. THE LCD DISPLAY SHOWS: Data hold . Max. value. Min. value. Decimal point. numeral screen. BTU (ft Low battery indicator 5.2. BUTTONS: 1. Power button 2. Lock up Max. and Min button 3.
Page 6
5.2.1. Power button Press the “ ” button to turn ON the power. The display comes alive. Press the “ ” button once again to turn OFF the power and put the device go into sleep mode. The display changes from light to dark. 5.2.2.
Page 7
5.2.5. Auto Range button Large integrated circuit design Press the “ ” power button to turn ON the power and put the device to operating mode. If “199.9” comes up on the screen, it suggests the device will become overloaded or has become overloaded “OL”. In this case, press the “...
Page 8
Picture 2: To test the sun’s intensity, put the device up close to the window Turn ON the headlights and put the device down close to them to test their intensity Picture 3 To test the sun’s intensity, put the device close to the window Measure the solar insulation effect of your house’s windows: Close the window.
8. BATTERY REPLACEMENT When the symbol " " is displayed, batteries need replacement. CAUTION Before replacing batteries disconnect the test leads from any energized circuits to avoid electrical shocks. Turn OFF the meter and disconnect the test leads from the input terminals. Unscrew the battery cover and remove the battery.
Need help?
Do you have a question about the SM206 and is the answer not in the manual?
Questions and answers