Table of Contents
Advertisement
2.3.1
Connection to the mains voltage
The HomeServer is connected via the power supply unit to the mains voltage (230 V~).
Important: Device starts up immediately when connected to mains voltage!
The HomeServer starts as soon as it is connected to the mains voltage and the on/off button
on the rear is switched on.
Important: Carry out lightning protection!
In order to avoid damage to the device, we highly recommend protecting the device from
overvoltage in the mains cable, at the network connection, at the ISDN adapter and in the
KNX/EIB voltage access using corresponding protective devices.
06.2012/V 2.0
Start-up and installation
13
Advertisement
Table of Contents
