Installing the Stand or Wall mount bracket
Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the LED display, comes into contact with it. DO NOT exert pressure on
the front of the TV at any time because the screen could crack.
NOTE
Product images are only for reference, actual product may vary in appearance.
Follow the illustrations and textual instructions below to complete the installa-
tion steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Using the 4 screws in the accessory bag, secure the Column Base to the Base
Stand tightly.
3. Secure the Base Assembly to the TV with the 4 screws in accessory tightly.
Column Base
Screws: M5×12
Screws: M5×12
2
Base Stand
Base Assembly