Hisense K362G Series Quick Setup Manual

1
ACCESSORIES LIST
User Manual Quick Setup Guide
Screw A (M5 × 12) × 8 Screw B (M6 × 45) × 4
Batteries: AAA × 2
2
INSTALLING THE STAND
Follow the illustrations below to complete the installation steps.
1 2
Stand cover
Groove
Ridge
Stand column
Back View
Align the front of the stand column Align the stand cover with the stand
with the front of the base, then insert column, then secure the stand cover to
the stand column into the base the stand column with 1 Screw A (M5
making sure that the groove in the x 12) . Make sure that the bottom of the
stand column aligns with the ridge in stand cover is flush against the top of
the base. Secure the stand column to the stand column.
the base with 3 Screws A (M5 x 12) .
3
NOTES
Product image is only for reference, actual product may
vary in appearance. Carefully place your TV facedown on
a soft, cushioned surface to prevent damage to the TV or
scratching to the screen.
Secure the stand to the TV with the 4
Screws A (M5 x 12).
3
INSTALLING A WALL-MOUNT BRACKET
If you want to attach the TV to a wall-mount bracket(not provided), you should
first remove the stand if it is pre-attached .
1
1. If you want to attach the TV to a wall-mount bracket (not
provided), you should first remove the stand if it is pre-attached.
Make sure the TV is laid face-down on a clean, safe, and
cushioned surface.
2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV
with the 4 screws in the Screw B pack.
Bracket (1.5~2.5 mm)
Spacer × 4
WARNING
To prevent internal damage to the TV and ensure the TV is
mounted securely, use only the 4 screws in the Screw B pack.
2
Remote Control
Spacer × 4
Wall-Mount hole pattern VESA (mm)
Wall-Mount screw size (mm)
Follow instructions provided with the Wall-Mount bracket.
If you are not sure of your ability to do complete the installa-
tion, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any
damages or injuries that occur due to mishandling or incorrect
assembly.
Be sure to use the provider spacers between the TV and the
bracket when attaching the mount.
4
BUTTONS AND CONNECTORS
MENU
INPUT
VOL+
VOL-
CH
CH
DIGITAL
DC 5V 0.5A(MAX)
AUDIO OUT
Item
MENU
INPUT
VOL+/-
CH /
(Power button)
ANT/CABLE
HDMI
COMPONENT IN
AV IN
Screw B
VGA
PC/DVI AUDIO IN
/AUDIO OUT
DIGITAL AUDIO OUT
USB
K362G
Series
Screws B
9.5~12.5 mm
Wall-mount Bracket
Screw
the TV's rear cover Spacer
400 × 400
M6
AC power cord
AV IN
VIDEO L AUDIO R
AUDIO
OUT/
Y P P
USB
B R
COMPONENT IN HDMI1/ARC
Description
Display the on-screen menu to setup your TV's features.
Select the different input signal sources.
Adjust the volume.
Select the channel.
Turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.
Connect an antenna or cable TV to this jack.
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
receiver.
Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YP P ) video and audio output jacks.
B R
Connect to the composite video and audio (L/R) output jacks on
external video devices.
Connect to a PC or other devices with a VGA or DVI interface.
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
Connect an audio amplifier to this jack.
Port for Digital Media Player and for software update.
5
REMOTE CONTROL
Power on/off
Select TV AV VGA
TV AV VGA USB
USB source
Select HDMI source
HDMI PICTURE COMPONENT
Select sound mode
SLEEP SOUND ASPECT
Set the sleep timer
Adjust closed caption mode
CCD TIME MTS/SAP
Display the current time
Menu button
FAV.CH
MENU
▲/ / /
Move Up/Down/Left
ENTER
/Right or adjust settings
Close the menu DISPLAY
EXIT
Increase volume
MUTE
VOL CH
Decrease volume
CH.LIST
Direct channel
selection
Dash button select
LAST
a digital sub-channel
Media content control
function buttons
GUIDE
EN-22652A
CHANGE THE BATTERIES
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Gently push and slide Insert the batteries
1 2
6
TV CONNECTORS
Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections are
tight and secure.
ANT Connect an outdoor VHF/UHF antenna.
OR
OR
USB
Connect a USB device for browsing photos, music and movies.
USB
DC 5V 0.5A(MAX)
Remote sensor
Select input source
Select picture mode
Select Component source
Zoom button
Audio select button Mono/
Stereo/SAP operation
Media content control function
buttons
Display favorite list
Confirm selections
Display the information banner
Mute button
Next channel
Previous channel
Display the channel name
Go to the previous
channel
Not available
Gently push and slide
3
VHF/UHF Antenna
Cable
ANT OUT
Mobile Hard Disk