Connecting The Power Supply - Bosch VOT-320-V019L Quick Installation Manual

14 en | Installing and connecting
4.8

Connecting the power supply

CAUTION!
Only operate the VOT-320 in combination with a SELV power
supply unit that meets the following specifications: 24 VAC
output voltage, min. 33.6 VA without pan/tilt.
Please observe the labeling on the camera module of the
VOT-320 and the correct position for the terminal block.
–
–
–
F.01U.266.039 | V5.5 | 2012.03
Connect the power supply unit cables to the terminal
block.
Connect the terminal block to the orange socket on the
VOT-320.
Insert the power supply unit plug into a suitable socket.
Quick Installation Guide Bosch Sicherheitssysteme GmbH
VOT-320