Measurement Setting - Kanomax 3888 User Manual

Measurement setting

Select [Measurement Setup] in the Main screen to set the mode, alarm, save, remote, and

temperature/humidity.
Icons
12
1.800.544.2843
Names
Selects 6 options of the measurement modes. Measurements will be
performed under the latest mode setting.
Repeat mode: Repeats the measurement of configured sampling

time and cycle.
Single mode: Performs a measurement of set sampling time only

once.
Continuous mode: Continues a measurement

Stop button
Calculation mode: Repeats the measurement under the same

condition of the Repeat mode and then calculate the average,
standard deviation, maximum, and minimum
ISO mode: Performs measurements in accordance with ISO 14644

GB mode: Performs measurements in accordance with Chinese

National Standard
Set the required conditions for 6 options of measurement modes.
Mode
Repeat
Single
Continuous
Calculation
ISO
GB
Tap indication (
Set the measurement conditions by entering numbers.
www.calcert.com
15
10 20
5 25
0 30
Functions
location Sampling
time
✔ ✔
✔ ✔
✔ ―
✔ ✔
✔ ✔
✔ ✔
) to display a Ten keyboard.
until pressing the
Repeat count Interval time
✔ ✔
― ―
― ―
✔ ✔
✔ ✔
✔ ✔
sales@calcert.com