TEKTELIC Communications TUNDRA Quick Start Manual

TEKTELIC Communications TUNDRA Quick Start Manual

Hide thumbs Also See for TUNDRA:

Advertisement

TEKTELIC TUNDRA Sensor:
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TUNDRA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TEKTELIC Communications TUNDRA

  • Page 1 TEKTELIC TUNDRA Sensor: Quick Start Guide...
  • Page 2 BEFORE YOU START Ensure the device is comissisioned on your network server before activation For assistance please visit http://www.support.tektelic.com Activating the Device The device is shipped with the batteries installed and in a state of DEEP-SLEEP until activated with a magnet. There is no need to open the enclosure to activate the device.
  • Page 3 Activation Troubleshooting If the device remains blinking green for more than two minutes follow these troubleshooting actions: • Ensure the device is provisioned on the Network Server • Ensure the local LoRa Gateway has also been provisioned on the Network Server •...
  • Page 4 The default data reporting periods are listed in Table 1. To make changes to the default data reporting periods, please refer to the knowledge base on the support portal at support.tektelic.com Table 1: Default Reporting Periods of the TUNDRA Sensor Application Solution: LeapX This device is by supported by the TEKTELIC LeapX Application To use LeapX, you will need a TEKTELIC Account.

This manual is also suitable for:

Tundra sensorSencnnus915Orca

Table of Contents