Table of Contents
Advertisement
Product Overview
1. End cap
2. Shaft
3. Guard
4. Outer blade
Specifications
Model
Blade Size
Tilling Width
Weight
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use the battery pack at
Use the machine at
*Charging time will increase if you do not charge the
battery pack within this range.
Store the machine, battery pack, and battery charger
in an enclosed clean, dry area.
Figure 4
5. Pin
6. Inner blade
7. Gearbox
8. Sleeve
88715, attaches to 51810T
25.4 cm (10 inches)
24.5 cm (10 inches)
8.6 kg (19.0 lbs)
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)*
0°C (32°F) to 49°C (120°F)*
Operation
Starting the Attachment
1.
Ensure that the vents on the attachment, power
head, and battery are clear of any dust and
debris.
2.
Align the cavity in the battery pack with the
tongue on the handle housing
g358711
3.
Push the battery pack into the handle until the
battery locks into the latch.
4.
To start the attachment, press the lockout button,
then squeeze the run trigger
Note:
Slide the variable-speed switch to
change the speed of the attachment.
1. Lockout button
2. Variable-speed switch
8
(Figure
5).
Figure 5
(Figure
6).
Figure 6
3. Run trigger
g357444
g357456
Advertisement
Table of Contents
