Operating Tips - Toro Flex-Force Power System 88715 Owner's Manual

60v max cultivator attachment
Hide thumbs Also See for Flex-Force Power System 88715:
Table of Contents

Advertisement

Shutting Off the Cultivator
To shut off the cultivator, release the run trigger
(Figure
6). Allow at least 5 seconds for the blades
to stop moving.
Whenever you are not using the cultivator or are
transporting the cultivator to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Power Head
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine
(Figure
7).
1. Battery latch
Removing the Attachment
from the Power Head
1.
Ensure that the battery pack is removed from
the power head; refer to
Pack from the Power Head (page
2.
Loosen the screw-handle on the shaft connector
(Figure
3).
3.
Press the locking button down while pulling the
2 shafts apart
(Figure
Figure 7
Removing the Battery
9).
3).

Operating Tips

Hold the cultivator with your right hand on the rear
handle and your left hand on the front handle.
Keep a firm grip with both hands while in operation.
The cultivator should be held at a comfortable
position with the rear handle at about hip height.
Inspect the area where you will use the cultivator
and remove all objects such as large rocks,
trash, and branches before cultivating to prevent
equipment damage.
Always begin cultivating with the slowest speed
possible. Increase the speed if conditions permit.
Do not place excessive body weight on the
cultivator. Use the weight of the machine to
cultivate more efficiently.
g357457
9

Advertisement

Table of Contents
loading

Table of Contents