If you have an Oztent Floor Saver, place it where you want to set up your tent prior to setting up fabric droop and wrinkles, and prevent rainwater from pooling.
Page 3
Place the 1.7m poles on each side to create Hammer in all bottom Pegs. forward and zip the Oztent Fly on the top of the tent. spacing and secure with guy ropes as shown. Degree angle to secure your tent.
Page 4
Ridge Pole in your Oztent Awning. Twist and right hand side first. purchase is registered with Oztent. To register, visit our website your product to Oztent at the address below. You must provide lock Ridge Pole when in place. and visit our “Register your product” page.
Need help?
Do you have a question about the EYRE E-1 and is the answer not in the manual?
Questions and answers