Download Print this page
OZTENT Malamoo Teepee 9 Assembly Instructions

OZTENT Malamoo Teepee 9 Assembly Instructions

Advertisement

Quick Links

Key Features:
Easy assembly
Uninterrupted floor space
Large windows and door for ventilation
UPF50+ and 100% waterproof
Sleeps 9
Description:
The Malamoo Teepee 9 is a traditional tent design that gives unprecedented open floor space. The
easy to set up pole gives a floor width of 440cm/173.2" and a height of 280cm/110.2". The internal
pole goes to the sides of the tent to give you uninterrupted floor space.
The Malamoo Teepee 9 is a huge tent that is extremely easy to set up but still weighs less than
8kg/17.6lb

Advertisement

loading
Need help?

Need help?

Do you have a question about the Malamoo Teepee 9 and is the answer not in the manual?

Questions and answers

Summary of Contents for OZTENT Malamoo Teepee 9

  • Page 1 440cm/173.2” and a height of 280cm/110.2”. The internal pole goes to the sides of the tent to give you uninterrupted floor space. The Malamoo Teepee 9 is a huge tent that is extremely easy to set up but still weighs less than 8kg/17.6lb...
  • Page 2 Features Easy assembly Simply peg out the base, assemble the pole, insert it so that it runs along the sides of the tent and you’re done! Easy setup so you can be sitting around the campfire sooner. Uninterrupted floor space No poles in the middle of the floor means you can utilize all the floor space.
  • Page 3: Specifications

    Specifications: Material Tent 190T Polyester Floor 120G PE floor Frame 25mm gauge steel Dimensions 75cm (L) x 25cm (W) x 25cm (H) Packed Size 29.5” (L) x 9.8” (W) x 9.8” (H) 440cm (L) x 440cm (W) x 280cm (H) Set Up Size 137.8”...
  • Page 4 Product dimensions shown here are nominal and are provided for the convenience of our customers. The Oztent Group reserves the right to make product changes from time to time, without prior notification, which may change the dimensions shown. The designs and dimensions of the products listed on this sheet are correct at the date of last publication and are subject to change without notice.
  • Page 5 MALAMOO TP-9 ASSEMBLY INSTRUCTIONS Step One: Assemble part A of the support pole, ensuring all sections are fully inserted into each other [Figure 1]. Figure 1 Step 2: Spread out the tent on the ground in your preferred location. Pull out the corners and loosely peg the tent to the ground [Figure 2].