Dyna-Glo DGB730SNB-D User's Manual And Operating Instructions page 12

Step 5: Insert one M6x12 screw (A) into each of the rear holes of the
cart left side panel and cart rear vertical beam (13 & 10), leaving
4-6mm clearance from screw head to the cart left side panel
and cart rear vertical beam (13 & 10). Attach the other cart
rear panels (12) by sliding the keyholes in the cart rear panel
over the inserted screws and then push with force. Secure the
cart rear panel (12) to the bottom shelf (1) by using two M6x12
screws (A). Tighten the two M6x12 screws on cart left side
panel and cart rear vertical beam (13 & 10).
Hardware Used
A M6x12 Screw
Step 6: Attach LP cylinder exclusion (6) to the bottom shelf (1) by using
three M4x12 screws (D).
Hardware/Parts Used
D M4x12 Screw
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 4 pcs
Qty: 3 pcs
10
5
6
13
10
6
D