Timer (Count Down) - Samsung NZ63K7777BK User Manual

Timer (count down)

Using the timer as a safety shutoff:
If a specific time is set for a cooking zone, the cooking zone will shut itself off once
this period of time has elapsed. This function can be used for multiple cooking
zones simultaneously.
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
NZ63K7777BK_ET_DG68-00803A-04_EN.indd 21
After switched on, press the
1.
corresponding cooking zone to activate
the flash signal for the corresponding
cooking zone display.
2. Press Timer control sensor. The
number 10 will be displayed above the
timer display.
NOTE
The default setting of the timer is 10.
3. Use the Timer setting sensor ( or
) to set the desired amount of time, for
example, 15 minutes, after which the
cooking zone will automatically switch
itself off. The safety shutoff is now
activated.
NOTE
The timer can be set from 1 to 99.
4.
To display the time remaining for any of the cooking zones, use the Timer control
sensor after select burner.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting sensor (
of time has elapsed, the cooking zone automatically switches itself off, an acoustic
signal sounds as confirmation and the timer display indicates.
NOTE
To change the settings quicker, touch and hold any of the
until the desired value is reached.
To cancel the timer settings, select the
target burner and hold down the Timer
sensor for 2 seconds. This
control
will cancel the burner's timer settings
with a beep. If holding down the Timer
control sensor for 2 seconds without
selecting a burner, this will cancel
the timer settings of the last changed
burner.
or ). After the set period
or control sensors
English 21
2017-05-26 11:14:49