Power Management; Pause; Flex Control - Samsung NZ63K7777BK User Manual

Power management

The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost
Power Management automatically reduced the heat setting of cooking zone.
1
3
2

Pause

The Pause function simultaneously switches all cooking zones that are
switched on to the low power setting and then back to the heat setting that was
previously set. This function can be used to briefly interrupt and then continue the
cooking process e.g. to take a telephone call.
When the Pause function is activated, all touch sensors except for the Pause
, Lock and the On/Off control
touch the Pause sensor again.
Control Panel
To Switch On
Touch Pause
To Switch Off
Touch Pause
NZ63K7777BK_ET_DG68-00803A-04_EN.indd 23
function,
• Left side : No.1 and No.2 is paired
cooking zone
• No.3 is only one cooking zone
The indicator for this cooking zone
alternates for some seconds between the set
heat setting and the maximum possible heat
setting. After then, the indicator changes
from the set heat setting to maximum
possible heat setting.
sensors are disabled. To resume cooking,
Display
Return to previous power level

Flex control

The Flex function can operate complete left side cooking zone for using large size
cookware. (example : oval cookware, fish kettle)
1.
2.
NOTE
• If you touch the Flex zone plus sensor during operating, Flex zone plus
function will be off.
• If you touch Flex zone Plus sensor while each burner operation different level,
burner set at a high level.
• Touching the Flex zone Plus sensor while the Flex zone is operating turns off
the Flex zone.
• When moving or adding cookware to a new Flex zone Plus, cancel the current
operation, and then press the corresponding sensor to activate the cooking
zone.
Touch the Flex zone Plus sensor.
For setting and adjusting the power
level, touch the Heat setting sensor.
English 23
2017-05-26 11:14:50