Advertisement
appointment is completed. These changes are done from your transmitter. It is also highly
recommended to make sure that all of the pagers are collected in from y our floor before
changing this feature as all the pagers will buzz when t hey receive this command.
To perform this procedure, all charging racks must be plugged to the power. After this
procedure is complete, all of your pagers will alert at the same time for the amount of time you
changed it to.
Press the third icon button on the top row of buttons on the transmitter. The icon looks like an
alarm clock..
1.
The display will then ask for a password. Enter 9513.
2.
Press the orange "Enter" key.
3.
Your transmitter will now display "Set Alert Time"
4.
Use the * and the # to scroll between options.
5.
When you come to the option you would like to choose, Press the green send button to
transmit the new settings to the pagers.
You will then be returned to the main idle screen. At this point, all of the pagers in your
system should tone for the amount of time that you selected.
Putting Pagers to Sleep
If your Pagers serve an area that is not used very often, such as conference rooms, or
reception halls, you may find it beneficial to put the pagers to sleep. Putting the pagers to sleep
simply means setting the pagers to turn off. When pagers are asleep, they do not tone when
they are page. This may also prove helpful if you move your Pager System from site to site as
a catering company may.
This command is sent from your transmitter. It is also highly recommended to make sure that
all of the pagers are collected in from your floor before changing this feature, as not to alert
customers that may be waiting to be called.
1.
At the standard idle screen, enter 9513 into the To: area on your transmitter.
Press the orange "Enter" key.
2.
3.
The transmitter will now wait for you to input a message.
Advertisement
