Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for pagertec Server Paging System
Summary of Contents for pagertec Server Paging System
- Page 1 Server Paging System...
- Page 2 Thank you for choosing Pagertec Thank you for choosing Pagertec as your provider for your wireless paging requirements. We greatly appreciate your confidence in our products. At Pagertec our greatest commitment is providing you with total customer satisfaction. Please take a few minutes to review this manual prior to installing and operating your system.
- Page 3 Server Paging Systems...
-
Page 4: Installing The Transmitter
Installing the Transmitter The first consideration in the placement of the transmitter is convenience. It should be readily accessible in a central location within the paging area. Pay close attention to nearby obstructions such as walls, pipes, ducts, mirrored glass, or other similar barriers that may weaken or misdirect transmitted signals. -
Page 5: General Information
Installing the Server Paging System GENERAL INFORMATION The Server Pagers are used in conjunction with the Pagertec transmitters. The staff pagers are used as an on-premise paging system to increase efficiency by alerting staff members to return to the kitchen usually to expedite food. who are waiting, usually for services or goods. -
Page 6: Battery Installation
Use a small flat head screw driver and insert it between the plastic lever and the pager. This will release the metal clip from the pager. Then, slide the metal clip out from the pager. Replace clip with an appropriate replacement part available for purchase as an accessory from Pagertec. -
Page 7: Mounting On The Wall
Pagertec pagers are made from industrial-strength, polycarbonate material. However, this material is susceptible to hairline cracking if non-approved cleaners are used. When cleaning Pagertec pagers, you should only use ETHYL ALCOHOL (ethanol) or ISOPROPYL ALCOHOL-BASED CLEANERS. We have done extensive testing with available cleaning materials and have not found any issues with either ethyl alcohol (ethanol) or isopropyl alcohol (IPA). - Page 8 2. Slide the ATX-01 into the bracket. 3. Finished WALL...
-
Page 9: Fcc Compliance And Advisory Statement
FCC COMPLIANCE AND ADVISORY STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.